SRNE Hybrid Solar Inverter 10Kwh Split Phase 120/240Vac **Parallel Model**
Introducing our Hybrid Solar Inverter, a powerful and efficient energy charging solution for your electronics, back-up power, and solar needs. With a voltage of 48v and a system configuration of Hybrid, this charger/inverter is perfect for those who want to use alternative energy supplies.
Equipped with an LCD display, Wi-Fi port, and automatic voltage detection, this SRNE brand inverter has a charging mode of MPPT (Maximum Power Point Tracking). Its features make it ideal for a variety of applications, such as home improvements, electrical supplies, and alternative energy chargers & inverters. Get ready to enjoy the benefits of clean energy with this high-quality inverter!
Model : ASP48100U200-H
Voltage : 48V
Power Source : Solar
Hybrid : Off grid or On grid
Wattage : 10,000, Peak 20,000
Rated Output : 120/240Vac (split phase/single phase)
Load Capacity of Motors : 6HP
Rated AC Frequency : 60Hz
Switch Time : 10ms (Typical)
• Supports lead acid battery and li-ion battery connections.
• With a dual activation function when the li-ion battery is dormant; either mains/photovoltaic power supply access can trigger the activation of the li-ion battery.
• Support split-phase and single-phase pure sine wave output.
• Supports four different voltage levels of 100Vac, 105Vac, 110Vac, and 120Vac per phase.
• Supports two solar inputs and simultaneous tracking of two solar maximum power charging/carrying capacity functions.
• Dual MPPT with 99.9% efficiency and maximum 22A current in a single circuit, perfectly adapted to high power modules.
• 4 charging modes are available: solar only, mains priority, solar priority, and mixed mains/PV charging.
• With the time-slot charging and discharging setting function, you can set the time period for cutting in/out of mains charging and switch the time period between battery discharging and mains bypass power supply mode.
• Energy saving mode function to reduce no-load energy losses.
• With two output modes of utility bypass and inverter output, with uninterrupted power supply function.
• LCD large screen dynamic flow diagram design, easy to understand the system data and operation status.
• 360° protection with complete short circuit protection, over current protection, over under voltage protection, overload protection, backfill protection, etc.
• Support CAN, USB, and RS485 communication.
• Max parallel 6units
FREE SHIPPING in the US, PR and HI.
Model ASF48100U200-H
Inverter output
Rated input voltage : 120/240Vac (L1/L2/N/PE split phase)
Frequency : 60Hz (Auto detection)
Rated output power : (W) 10,000W
Max. peak power : (W) 20,000W
Load Capacity of Motors : 6HP
Waveform : Pure Sine Wave
Switch Time : 10S (typical)
Battery
Battery type : Lead acid or lithium battery
Rated Battery Voltage : 48V
Max.MPPT Charging Current : 200A
Max.Mains / Generator Charging Current : 120A
Max.Hybrid Charging Current : 200A
PV charging
Maximum PV open circuit voltage : 500Vdc
PV operating voltage range : 125-425Vdc
Max.PV array power : 11000W
Num. of MPP Trackers : 2
Communication interface
Communication interface : RS485 / CAN / USB / Dry contact
External Modules: (Optional) Wi-Fi / GPRS
General
Cooling Method : Internal Fan
Noise : <60dB